Site Fixing Kit
Structural screws, coach screws, anchors, toggles, case
$118.00
USDFree standard shipping. Arrives in 3–6 business days. 30-day returns.
What is in this set
- 1 × Bracken Structural Screw 6 × 80$28.00
- 1 × Bracken Structural Screw 8 × 140$34.00
- 1 × Thorn Coach Screw 10 × 100$31.00
- 1 × Gant Sleeve Anchor M10 × 90$37.00
- 1 × Gant Fastener Case$34.00
Four boxes of fixings and the gasketed case to keep them in — the interior structural screws in two lengths, galvanised coach screws for outdoor work, and sleeve anchors for solid masonry. Between them they cover most of what a fixing bag is asked for in a week.
Read the finish notes before you use them. Two of these boxes are interior-only phosphate and one is hot-dip galvanised, and the difference is not visible across a workbench once they are out of the box. The case is the reason the kit exists: labelled compartments are what keeps that distinction real.
Working load limits
What this item holds, in the material you are fixing into. Every figure is a working load — the safety factor is already taken out.
Safety factor5:1 — every figure below is the tested mean divided by five.
| Substrate / condition | Working load | Notes |
|---|---|---|
| Bracken 6 × 80, softwood, 50 mm penetration | 205 lb | Withdrawal. |
| Bracken 8 × 140, softwood, 80 mm penetration | 390 lb | Withdrawal. |
| Thorn coach screw, softwood, 65 mm thread | 480 lb | Withdrawal, piloted. |
| Gant sleeve anchor, C30 concrete, 80 mm embedment | 1,240 lb | Tension. See the anchor's own page for the other substrates. |
How these were arrived at
Each figure above is the headline row from that item's own table; every item has a fuller table on its own page covering the other substrates. Use those, not these, when the substrate is not the one listed here.
The specification
Everything we know about this item, stated plainly. The same record is printed on the card in the box.
- Composition
- Bracken Structural Screw 6 × 80, box of 50; Bracken Structural Screw 8 × 140, box of 25; Thorn Coach Screw 10 × 100, box of 25; Gant Sleeve Anchor M10 × 90, box of 20; Gant Fastener Case, twelve compartments.
- Dimensions
- Case 355 × 250 × 55 mm. Boxed 380 × 275 × 90 mm.
- Weight
- 5.83 kg complete
- Finish & variation
- Mixed by design — phosphate on the two Bracken boxes (interior only), hot-dip galvanised on the Thorn, bright zinc on the Gant anchors (interior only). Keep them in labelled compartments.
- Made
- Fasteners cold-formed and finished in the Ruhr, Germany; case moulded in Ohio; counted and packed here in Pennsylvania.
Care
- Keep each fixing in a labelled compartment. The finishes are not distinguishable by eye once they are loose.
- Keep the case gasket clean and the case closed.
- Pilot in hardwood and near an edge, always.
Cautions
- Two of the four boxes are interior-only finishes. Using phosphate or bright zinc outdoors will fail within a season.
- Not engineered fasteners. These are general site fixings, not parts specified on a structural drawing.
- A kit ships as one parcel. If a single item arrives damaged we replace that item, not the kit.
Shipping
$9.00 standard, free over $85. 3–6 business days. Full policy
30 DAYS
Returns
Unused and in original packaging. Refunded within 5 business days of reaching us. Full policy
Questions about this product
help@livwellhardware.comEvery message answered within one business day.
